When deploying to a production system run through the source system setup as defined in the technical setup here.
Then schedule recordings which incrementally increase the recording time and complexity as below, while the SAP Basis team closely monitors the system performance as per the user guide here.
| Level | Volume | Users | Filtered | Duration | Dialog | Batch | RFC |
| 1 | Low | 1 | Yes | 5 minutes | Yes | ||
| 2 | Medium | <50 | Yes | 10 minutes | Yes | ||
| 3 | Medium | <50 | Yes | 30 minutes | Yes | Yes | |
| 4 | Medium | All | No | 30 minutes | Yes | Yes | |
| 5 | High | All | No | 1 hour | Yes | Yes | Yes |
| 6 | High | All | No | 3 hours | Yes | Yes | Yes |
| 7 | High | All | No | 5 hours + | Yes | Yes | Yes |
| 8 | High | All | No | 8 hours + | Yes | Yes | Yes |
On successfully completing the ramp up of recordings you can then schedule a recording along side a system copy, start the recording first then copy the system restoring the system back as per the recommended steps here.. You should then prepare to start your first production playback.
Post your comment on this topic.